Home › General › SPECIFICATIONS › 1VD-FTV LUBRICATION › 2014.08–2016.08
RM25T0E _V1 General _029810 SPECIFICATIONS _0141510 1VD-FTV LUBRICATION F

SPECIFICATIONS  1VD-FTV LUBRICATION  SERVICE DATA  


ENGINE OIL PRESSURE
Condition Specified Condition
Idle 50 kPa (0.5 kgf/cm2, 7.3 psi) or more
2500 rpm 230 kPa (2.3 kgf/cm2, 33 psi) or more

STANDARD OIL GRADE
Oil Grade Oil Viscosity (SAE)
API CF-4, CF or ACEA B1
(You may also use API CE or CD)
- 5W-30
- 10W-30
- 15W-40
- 20W-50
(5W-30 is best choice for fuel economy and good starting in cold weather.)

STANDARD CAPACITY
Item Specified Condition
Drain and refill without oil filter change 8.5 liters (9.0 US qts, 7.5 Imp. qts)
Drain and refill with oil filter change 9.4 liters (9.9 US qts, 8.3 Imp. qts)
Dry fill 10.5 liters (11.1 US qts, 9.2 Imp. qts)

OIL PRESSURE SWITCH (w/o Oil Pressure Gauge)
Tester Connection Condition Specified Condition
1 - Engine ground Engine stopped Below 1 Ω
Engine idling 10 kΩ or higher

OIL LEVEL SENSOR
Tester Connection Condition Specified Condition
1 - 2 ON at 20°C (68°F) Below 1 Ω
OFF at 20°C (68°F) Below 1 Ω
ON at 60°C (140°F) Below 1 Ω
OFF at 60°C (140°F) 10 kΩ or higher