Do not allow any dirt (fingerprints, grease, etc.) to adhere to the meter glass. If the glass is dirty, wipe it clean with a soft cloth.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
83821A 1.INSTALL NO. 1 COMBINATION METER COVER
Attach the 2 claws to install the No. 1 combination meter cover.
Install the 2 screws.
83138 2.INSTALL SPEEDOMETER GLASS
Attach the 7 claws to install the speedometer glass.
Install the 2 screws.