Home › Vehicle Interior › METER / GAUGE / DISPLAY › CLOCK
RM25T0E _58 Vehicle Interior _029927 METER / GAUGE / DISPLAY _0141576 CLOCK G

METER / GAUGE / DISPLAY  CLOCK  INSPECTION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 83910 1.INSPECT CLOCK ASSEMBLY

a.
E193118C02
0.708,1.083 1.365,1.188 true 1.292,0.354 1.583,0.896 true 0.115,0.083 0.427,0.24 0.313,0.156 10 false *a 1.146,0.177 1.521,0.375 0.375,0.198 10 false ILL+ 0.375,0.99 0.833,1.188 0.458,0.198 10 false GND
*a Component without harness connected
(Clock Assembly)


Check the illumination.

Apply battery voltage to the connector and check the illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 3 (ILL+)
Battery negative (-) → Terminal 8 (GND)
Illuminates


If the result is not as specified, replace the clock assembly.