81241 1.REMOVE NO. 1 ROOM LIGHT LENS
| *1 | Protective Tape |
Using a screwdriver, detach the 3 claws and remove the No. 1 room light lens.
Tape the screwdriver tip before use.
81240 2.REMOVE NO. 1 ROOM LIGHT ASSEMBLY
Remove the 4 screws.
Disconnect the connector and remove the No. 1 room light assembly.
81241A 3.REMOVE NO. 2 ROOM LIGHT LENS
| *1 | Protective Tape |
Using a screwdriver, detach the 3 claws and remove the No. 2 room light lens.
Tape the screwdriver tip before use.
81240D 4.REMOVE NO. 2 ROOM LIGHT ASSEMBLY
Remove the 4 screws.
Disconnect the connector and remove the No. 2 room light assembly.