Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
84233 1.INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
Connect the connector.
Install the front door courtesy light switch assembly with the bolt.
62512 2.INSTALL QUARTER INSIDE TRIM BOARD LH
Install the quarter inside trim board LH with the 12 clips.
73298B 3.INSTALL QUARTER TRIM BELT HOLE COVER LH
Install the quarter trim belt hole cover LH with the 2 screws.
73299 4.INSTALL NO. 2 QUARTER TRIM BELT HOLE COVER LH
Install the No. 2 quarter trim belt hole cover LH with the 2 screws.