Home › Vehicle Interior › LIGHTING (INT) › REAR DOOR COURTESY SWITCH(for Double Cab)
RM25T0E _58 Vehicle Interior _029926 LIGHTING (INT) _0141625 REAR DOOR COURTESY SWITCH(for Double Cab) A

LIGHTING (INT)  REAR DOOR COURTESY SWITCH(for Double Cab)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 84234 1.INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

a.

Connect the connector.


b.

Install the rear door courtesy light switch assembly with the bolt.


Hide 62512 2.INSTALL QUARTER INSIDE TRIM BOARD LH

a.

Attach the 2 clips to install the quarter inside trim board LH.


b.

Install the 3 clips.