69350 1.INSPECT BACK DOOR LOCK ASSEMBLY (BACK DOOR COURTESY SWITCH)
| *1 | Latch |
| *2 | Screwdriver |
| *a | Component without harness connected (Back Door Lock Assembly (Back Door Courtesy Switch)) |
| *b | Lock |
| *c | Unlock |
Move the back door lock assembly (back door courtesy switch) to the lock position.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Lock | 10 kΩ or higher |
Move the back door lock assembly (back door courtesy switch) to the unlock position.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Unlock | Below 1 Ω |
If the result is not as specified, replace the back door lock assembly (back door courtesy switch).