Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55312C 1.REMOVE INSTRUMENT RETAINER PLATE
Remove the 2 bolts <A>, 7 bolts <B> and instrument retainer plate.
| *1 | Bolt <A> | *2 | Bolt <B> |
55089 2.REMOVE NO. 6 HEATER TO REGISTER DUCT SUB-ASSEMBLY
| *1 | Bolt <B> |
Remove the bolt <B>.
Detach the 2 claws and guide, and remove the No. 6 heater to register duct sub-assembly.
55084E 3.REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
Use the same procedure described for the No. 6 heater to register duct sub-assembly.
55950G 4.REMOVE DEFROSTER NOZZLE ASSEMBLY
| *1 | Bolt <B> |
Remove the 3 bolts <B> and defroster nozzle assembly.
55846B 5.REMOVE NO. 4 HEATER TO REGISTER DUCT
| *1 | Bolt <B> |
Remove the 2 bolts <B> and No. 4 heater to register duct.
55845A 6.REMOVE NO. 3 HEATER TO REGISTER DUCT
Use the same procedure described for the No. 4 heater to register duct.
7.REMOVE NO. 2 INSTRUMENT PANEL REGISTER OPENING COVER (w/o Air Conditioning System)
| *1 | Bolt <B> |
| *2 | Protective Tape |
Remove the 2 bolts <B>.
Using a screwdriver, detach the 2 claws and remove the No. 2 instrument panel register opening cover.
Tape the screwdriver tip before use.
8.REMOVE NO. 1 INSTRUMENT PANEL REGISTER OPENING COVER (w/o Air Conditioning System)
Use the same procedure described for the No. 2 instrument panel register opening cover.
55680A 9.REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY (w/ Air Conditioning System)
| *1 | Bolt <B> |
| *2 | Protective Tape |
Remove the 2 bolts <B>.
Using a screwdriver, detach the 2 claws and remove the No. 4 instrument panel register assembly.
Tape the screwdriver tip before use.
55670 10.REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY (w/ Air Conditioning System)
Use the same procedure described for the No. 4 instrument panel register assembly.
55660 11.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
| *1 | Bolt <B> |
| *2 | Protective Tape |
Remove the 2 bolts <B>.
Using a screwdriver, detach the 2 claws and remove the No. 2 instrument panel register assembly.
Tape the screwdriver tip before use.
55650 12.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
Use the same procedure described for the No. 2 instrument panel register assembly.
86101 13.REMOVE ANTENNA CORD SUB-ASSEMBLY
Detach the clamps and remove the antenna cord sub-assembly.
55448A 14.REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION
Use the same procedure for both No. 1 instrument panel finish cushions.
Remove the No. 1 instrument panel finish cushion.