Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING (for Double Cab) › 2014.08–2022.09
RM25T0E _58 Vehicle Interior _029934 INTERIOR PANELS / TRIM _0142495 ROOF HEADLINING(for Double Cab) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for Double Cab)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 63311A 1.INSTALL NO. 1 ROOF HEADLINING

a.
B327806

Place the No. 1 roof headlining into the vehicle through the front door.

NOTICE:
·

Check that the corners of the No. 1 roof headlining are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.

·

Make sure that the No. 1 roof headlining does not get caught on anything as it may become bent or damaged.

·

Do not damage the No. 1 roof headlining or vehicle interior.




b.
B327805

Install the roof headlining assembly with the 5 clips.


Hide 87810 2.INSTALL INNER REAR VIEW MIRROR ASSEMBLY

Hide 87834 3.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER

Hide 87827 4.INSTALL INNER REAR VIEW MIRROR ABSORBER

Hide 74348 5.INSTALL VISOR HOLDER

HINT:

Use the same procedure for both visor holders.


a.

Attach the clip to install the visor holder.


b.

Install the screw.


Hide 74320 6.INSTALL VISOR ASSEMBLY LH

a.

Install the visor assembly LH with the 2 screws.


Hide 74310 7.INSTALL VISOR ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 63312A 8.INSTALL NO. 2 ROOF HEADLINING

a.
B327807

Place the No. 2 roof headlining into the vehicle through the rear door.

NOTICE:
·

Check that the corners of the No. 2 roof headlining are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.

·

Make sure that the No. 2 roof headlining does not get caught on anything as it may become bent or damaged.

·

Do not damage the No. 2 roof headlining or vehicle interior.




b.
B327804

Install the No. 2 roof headlining with the 6 clips.


Hide 81240 9.INSTALL NO. 1 ROOM LIGHT ASSEMBLY

Hide 81241 10.INSTALL NO. 1 ROOM LIGHT LENS

Hide 74620B 11.INSTALL REAR ASSIST GRIP ASSEMBLY

HINT:

Use the same procedure for both rear assist grip assemblies.


a.

for Type A:

Install the rear assist grip assembly with the 2 screws.


b.

for Type B:

Using a T25 "TORX" socket wrench, install the rear assist grip assembly with the 2 screws.


Hide 74610A 12.INSTALL ASSIST GRIP SUB-ASSEMBLY

a.

for Type A:

Install the assist grip sub-assembly with the 2 screws.


b.

for Type B:

Using a T25 "TORX" socket wrench, install the assist grip sub-assembly with the 2 screws.


Hide 74617C 13.INSTALL ASSIST GRIP PLUG

HINT:

Use the same procedure for all assist grip plugs.


a.

Attach the 2 claws to install the assist grip plug.


Hide 62639A 14.INSTALL QUARTER PILLAR GARNISH LH

a.
B327803

Attach the 4 clips to install the quarter pillar garnish LH.


b.

Install the 2 clips.


c.
B386399C01
1.917,1.042 2.531,0.667 false 2.563,0.531 2.875,0.688 0.313,0.156 10 false *1
*1 Protective Tape


Using a screwdriver, insert the back window glass weatherstrip into the quarter pillar garnish LH.

HINT:

Tape the screwdriver tip before use.



d.

Connect the rear seat belt shoulder anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


e.

Attach the 2 claws to close the rear seat belt shoulder anchor cover.


Hide 62638A 15.INSTALL QUARTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62412 16.INSTALL CENTER PILLAR GARNISH LH

a.

Attach the 3 guides and clip to install the center pillar garnish LH.


b.

Connect the front seat belt shoulder anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


c.

Attach the 2 claws to close the front seat belt shoulder anchor cover.


Hide 62411 17.INSTALL CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 74630E 18.INSTALL REAR ASSIST GRIP ASSEMBLY LH

a.

Install the rear assist grip assembly LH with the 2 screws.


b.

for Type B:

Using a T25 "TORX" socket wrench, install the rear assist grip assembly LH with the 2 screws.


Hide 74620C 19.INSTALL REAR ASSIST GRIP ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 62212 20.INSTALL FRONT PILLAR GARNISH LH

a.

Attach the clip and claw to install the front pillar garnish LH.


Hide 62211 21.INSTALL FRONT PILLAR GARNISH RH

a.

Attach the clip and claw to install the front pillar garnish RH.


b.

w/o Assist Grip:

Install the 2 clips.


Hide 74603 22.INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY

HINT:

Use the same procedure for both front assist grip sub-assemblies.


a.

for Type A:

Install the front assist grip sub-assembly with the 2 screws.


b.

for Type B:

Using a T25 "TORX" socket wrench, install the front assist grip sub-assembly with the 2 screws.


Hide 74617A 23.INSTALL ASSIST GRIP PLUG

HINT:

Use the same procedure for all assist grip plugs.


a.

Attach the 2 claws to install the assist grip plug.


Hide 55356B 24.INSTALL INSTRUMENT PANEL PLATE LH

Hide 55355B 25.INSTALL INSTRUMENT PANEL PLATE RH

Hide 62332C 26.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

a.

Install the rear door opening trim weatherstrip LH.


Hide 62331C 27.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 62316C 28.INSTALL FRONT DOOR REAR OPENING TRIM WEATHERSTRIP LH

a.

Install the front door rear opening trim weatherstrip LH.


Hide 62315E 29.INSTALL FRONT DOOR REAR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 62414A 30.INSTALL LOWER CENTER PILLAR GARNISH LH

a.

Put protective tape around the lower center pillar garnish LH.


b.

Insert the bottom of the lower center pillar garnish LH.


c.

Attach one side of the lower center pillar garnish LH.


d.

Using a clip remover, attach the other side of the lower center pillar garnish LH as shown in the illustration to install the lower center pillar garnish LH.

HINT:

Tape the clip remover tip before use.


B386398C01
2.156,1.427 2.479,1.01 true 1.198,1.708 1.854,1.792 true 1.021,1.604 1.333,1.76 0.313,0.156 10 false *1 2.448,0.854 2.76,1.01 0.313,0.156 10 false *1
*1 Protective Tape - -



Hide 62413A 31.INSTALL LOWER CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62112A 32.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

a.

Attach the clip to install the cowl side trim sub-assembly LH.


b.

Install the cap nut.


Hide 62111A 33.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 67918A 34.INSTALL REAR DOOR SCUFF PLATE LH

a.
B386396

Attach the 2 clips to install the rear door scuff plate LH.


Hide 67917A 35.INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 67914 36.INSTALL FRONT DOOR SCUFF PLATE LH

a.
B386397

Attach the 4 clips to install the front door scuff plate LH.


Hide 67913 37.INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.