Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
63310 1.INSTALL ROOF HEADLINING ASSEMBLY
Place the roof headlining into the vehicle through the front door.
Check that the corners of the roof headlining assembly are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.
Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.
Do not damage the roof headlining assembly or vehicle interior.
Install the roof headlining assembly with the 8 clips.
81290 2.INSTALL NO. 3 ROOM LIGHT ASSEMBLY
87810 3.INSTALL INNER REAR VIEW MIRROR ASSEMBLY
87834 4.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER
87827 5.INSTALL INNER REAR VIEW MIRROR ABSORBER
74348 6.INSTALL VISOR HOLDER
Use the same procedure for both visor holders.
Attach the clip to install the visor holder.
Install the screw.
74320 7.INSTALL VISOR ASSEMBLY LH
Install the visor assembly LH with the 2 screws.
74310 8.INSTALL VISOR ASSEMBLY RH
Use the same procedure described for the LH side.
74610A 9.INSTALL ASSIST GRIP SUB-ASSEMBLY
Install the assist grip sub-assembly with the 2 screws.
74617C 10.INSTALL ASSIST GRIP PLUG
Use the same procedure for all assist grip plugs.
Attach the 2 claws to install the assist grip plug.
62412 11.INSTALL CENTER PILLAR GARNISH LH
Attach the 5 clips to install the center pillar garnish LH.
Install the 3 clips.
| *1 | Protective Tape |
Using a screwdriver, insert the back window glass weatherstrip into the center pillar garnish LH.
Tape the screwdriver tip before use.
Connect the front seat belt anchor with the bolt.
Connect the front seat belt shoulder anchor with the bolt.
Attach the 2 claws to close the front seat belt shoulder anchor cover.
62411 12.INSTALL CENTER PILLAR GARNISH RH
Use the same procedure described for the LH side.
58707A 13.INSTALL JACK HOLDER SUB-ASSEMBLY
Install the jack holder sub-assembly with the 2 bolts.
73174 14.INSTALL FRONT SEAT BELT HOLE COVER LH
Attach the 2 guides and 2 claws to install the front seat belt hole cover LH.
73173 15.INSTALL FRONT SEAT BELT HOLE COVER RH
Use the same procedure described for the LH side.
62212 16.INSTALL FRONT PILLAR GARNISH LH
Attach the clip and claw to install the front pillar garnish LH.
62211 17.INSTALL FRONT PILLAR GARNISH RH
Attach the clip and claw to install the front pillar garnish RH.
w/o Assist Grip:
Install the 2 clips.
74603 18.INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY
Use the same procedure for both front assist grip sub-assemblies.
Install the front assist grip sub-assembly with the 2 screws.
74617A 19.INSTALL ASSIST GRIP PLUG
Use the same procedure for all assist grip plugs.
Attach the 2 claws to install the assist grip plug.
55356B 20.INSTALL INSTRUMENT PANEL PLATE LH
55355B 21.INSTALL INSTRUMENT PANEL PLATE RH
62316C 22.INSTALL FRONT DOOR REAR OPENING TRIM WEATHERSTRIP LH
Install the front door rear opening trim weatherstrip LH.
62315E 23.INSTALL FRONT DOOR REAR OPENING TRIM WEATHERSTRIP RH
Use the same procedure described for the LH side.
62112A 24.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
Attach the clip to install the cowl side trim sub-assembly LH.
Install the cap nut.
62111A 25.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
67914 26.INSTALL FRONT DOOR SCUFF PLATE LH
Install the front door scuff plate LH with the 4 screws.
67913 27.INSTALL FRONT DOOR SCUFF PLATE RH
Use the same procedure described for the LH side.