Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING (for Short Body)
RM25T0E _58 Vehicle Interior _029934 INTERIOR PANELS / TRIM _0142489 ROOF HEADLINING(for Short Body) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for Short Body)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 67914 1.REMOVE FRONT DOOR SCUFF PLATE LH

a.
B235520

Remove the 4 screws and front door scuff plate LH.


Hide 67913 2.REMOVE FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 62112A 3.REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

a.
B386296

Remove the cap nut.


b.

Detach the clip and remove the cowl side trim sub-assembly LH.


Hide 62111A 4.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 62316C 5.REMOVE FRONT DOOR REAR OPENING TRIM WEATHERSTRIP LH

a.
B234852

Remove the front door rear opening trim weatherstrip LH.


Hide 62315E 6.REMOVE FRONT DOOR REAR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 55356B 7.REMOVE INSTRUMENT PANEL PLATE LH

Hide 55355B 8.REMOVE INSTRUMENT PANEL PLATE RH

Hide 74617A 9.REMOVE ASSIST GRIP PLUG

HINT:

Use the same procedure for all assist grip plugs.


a.
B234351C02
1.708,1.625 2.219,0.979 true 2.188,0.813 2.5,0.969 0.313,0.156 10 false *1
*1 Protective Tape


Using a screwdriver, detach the 2 claws and remove the assist grip plug.

HINT:

Tape the screwdriver tip before use.



Hide 74603 10.REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY

HINT:

Use the same procedure for both front assist grip sub-assemblies.


a.
B234353

for Type A:

Remove the 2 screws and front assist grip sub-assembly.


b.

for Type B:

Using a T25 "TORX" wrench, remove the 2 screws and front assist grip sub-assembly.


Hide 62212 11.REMOVE FRONT PILLAR GARNISH LH

a.
B234354

Detach the claw and clip and remove the front pillar garnish LH.


Hide 62211 12.REMOVE FRONT PILLAR GARNISH RH

a.
B234355

w/o Assist Grip:

i.

Using a clip remover, remove the 2 clips.

HINT:

Tape the clip remover tip before use.




b.
B235605

Detach the claw and clip and remove the front pillar garnish RH.


Hide 58573A 13.REMOVE REAR FLOOR MAT SUPPORT PLATE

B234860

a.

Remove the 4 screws and rear floor mat support plate.


Hide 64805 14.REMOVE BACK DOOR OPENING TRIM SUB-ASSEMBLY

a.
B234853

Remove the back door opening trim sub-assembly.


Hide 74617C 15.REMOVE ASSIST GRIP PLUG

HINT:

Use the same procedure for all assist grip plugs.


a.
B234351C02
1.708,1.625 2.219,0.979 true 2.188,0.813 2.5,0.969 0.313,0.156 10 false *1
*1 Protective Tape


Using a screwdriver, detach the 2 claws and remove the assist grip plug.

HINT:

Tape the screwdriver tip before use.



Hide 74610A 16.REMOVE ASSIST GRIP SUB-ASSEMBLY

a.
B234352

for Type A:

Remove the 2 screws and assist grip sub-assembly.


b.

for Type B:

Using a T25 "TORX" wrench, remove the 2 screws and assist grip sub-assembly.


Hide 74620B 17.REMOVE REAR ASSIST GRIP ASSEMBLY

HINT:

Use the same procedure for both front assist grip sub-assemblies.


a.
B234352

for Type A:

Remove the 2 screws and rear assist grip assembly.


b.

for Type B:

Using a T25 "TORX" wrench, remove the 2 screws and rear assist grip assembly.


Hide 74320 18.REMOVE VISOR ASSEMBLY LH

a.
B234361

Remove the 2 screws and visor assembly LH.


Hide 74310 19.REMOVE VISOR ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 74348 20.REMOVE VISOR HOLDER

HINT:

Use the same procedure for both visor holders.


a.
B234362

Remove the screw.


b.

Detach the clip and remove the visor holder.


Hide 87827 21.REMOVE INNER REAR VIEW MIRROR ABSORBER

Hide 87834 22.REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER

Hide 87810 23.REMOVE INNER REAR VIEW MIRROR ASSEMBLY

Hide 81241 24.REMOVE NO. 1 ROOM LIGHT LENS

Hide 81240 25.REMOVE NO. 1 ROOM LIGHT ASSEMBLY

Hide 63310 26.REMOVE ROOF HEADLINING ASSEMBLY

a.
B235470

Remove the upper part of the quarter window glass weatherstrip so that the roof headlining assembly can be removed.

HINT:

Use the same procedure for the other quarter window glass weatherstrip.



b.
B235472

Remove the 10 clips.


c.
B235471

Remove the roof headlining from the back door as shown in the illustration.

NOTICE:
·

Make sure wrinkles do not form in the roof headlining assembly during removal.

·

Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.

·

Do not damage the roof headlining assembly or vehicle interior.