Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
63310 1.INSTALL ROOF HEADLINING ASSEMBLY
Place the roof headlining assembly into the vehicle through the back door.
Check that the corners of the roof headlining assembly are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.
Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.
Do not damage the roof headlining assembly or vehicle interior.
Install the roof headlining assembly with the 10 clips.
Install the upper part of the quarter window glass weatherstrip.
Use the same procedure for the other quarter window glass weatherstrip.
81240 2.INSTALL NO. 1 ROOM LIGHT ASSEMBLY
81241 3.INSTALL NO. 1 ROOM LIGHT LENS
87810 4.INSTALL INNER REAR VIEW MIRROR ASSEMBLY
87834 5.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER
87827 6.INSTALL INNER REAR VIEW MIRROR ABSORBER
74348 7.INSTALL VISOR HOLDER
Use the same procedure for both visor holders.
Attach the clip to install the visor holder.
Install the screw.
74320 8.INSTALL VISOR ASSEMBLY LH
Install the visor assembly LH with the 2 screws.
74310 9.INSTALL VISOR ASSEMBLY RH
Use the same procedure described for the LH side.
74620B 10.INSTALL REAR ASSIST GRIP ASSEMBLY
Use the same procedure for both rear assist grip assemblies.
for Type A:
Install the rear assist grip assembly with the 2 screws.
for Type B:
Using a T25 "TORX" socket wrench, install the rear assist grip assembly with the 2 screws.
74610A 11.INSTALL ASSIST GRIP SUB-ASSEMBLY
for Type A:
Install the assist grip sub-assembly with the 2 screws.
for Type B:
Using a T25 "TORX" socket wrench, install the assist grip sub-assembly with the 2 screws.
74617C 12.INSTALL ASSIST GRIP PLUG
Use the same procedure for all assist grip plugs.
Attach the 2 claws to install the assist grip plug.
64805 13.INSTALL BACK DOOR OPENING TRIM SUB-ASSEMBLY
Install the back door opening trim sub-assembly.
58573A 14.INSTALL REAR FLOOR MAT SUPPORT PLATE
Install the rear floor mat support plate with the 4 screws.
62212 15.INSTALL FRONT PILLAR GARNISH LH
Attach the clip and claw to install the front pillar garnish LH.
62211 16.INSTALL FRONT PILLAR GARNISH RH
Attach the clip and claw to install the front pillar garnish RH.
w/o Assist Grip:
Install the 2 clips.
74603 17.INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY
Use the same procedure for both front assist grip sub-assemblies.
for Type A:
Install the front assist grip sub-assembly with the 2 screws.
for Type B:
Using a T25 "TORX" socket wrench, install the assist grip sub-assembly with the 2 screws.
74617A 18.INSTALL ASSIST GRIP PLUG
Use the same procedure for all assist grip plugs.
Attach the 2 claws to install the assist grip plug.
55356B 19.INSTALL INSTRUMENT PANEL PLATE LH
55355B 20.INSTALL INSTRUMENT PANEL PLATE RH
62316C 21.INSTALL FRONT DOOR REAR OPENING TRIM WEATHERSTRIP LH
Install the front door rear opening trim weatherstrip LH.
62315E 22.INSTALL FRONT DOOR REAR OPENING TRIM WEATHERSTRIP RH
Use the same procedure described for the LH side.
62112A 23.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
Attach the clip to install the cowl side trim sub-assembly LH.
Install the cap nut.
62111A 24.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
67914 25.INSTALL FRONT DOOR SCUFF PLATE LH
Install the front door scuff plate LH with the 4 screws.
67913 26.INSTALL FRONT DOOR SCUFF PLATE RH
Use the same procedure described for the LH side.