1.INSPECT STEERING COLUMN ASSEMBLY
Inspect the No. 1 tilt steering support collar.
| *1 | No. 1 steering support collar |
Check that the 2 No. 1 tilt steering support collars are securely installed to the steering column assembly.
If the bushings are missing or damaged, replace the No. 1 tilt steering support collars with a new one.
Inspect the break away capsules.
Check that the 2 break away capsules are securely installed to the steering column assembly as shown in the illustration.
| A | B |
| 15.8 mm (0.6220 in.) | 2 mm (0.0787 in.) |
If the break away capsules are not positioned as specified, replace the break away capsule and break away collar, break away bracket with a new one.
Check the 2 break away capsules for deformation and damage.
If the break away capsules are not positioned as specified, replace the break away capsule and break away collar, break away bracket with a new one.