67918A 1.REMOVE REAR DOOR SCUFF PLATE LH
Detach the 2 clips and remove the rear door scuff plate LH.
62552F 2.REMOVE REAR SEAT SIDE GARNISH LH
Detach the 2 clips.
Remove the rear seat side garnish LH in the direction of the arrow shown in the illustration.
64707D 3.REMOVE QUARTER TRIM JACK COVER SUB-ASSEMBLY
Rotate the knob in the direction of the arrow shown in the illustration and remove the quarter trim jack cover sub-assembly.
62640P 4.REMOVE QUARTER TRIM PANEL ASSEMBLY LH
Detach the 10 clips and remove the quarter trim panel assembly LH.
62630P 5.REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for RH Side)
Detach the 12 clips and remove the quarter trim panel assembly RH.
73370 6.REMOVE REAR SEAT OUTER 3 POINT TYPE BELT ASSEMBLY LH
Loosen the bolt and disconnect the floor anchor of the rear seat outer 3 point type belt assembly LH from the vehicle body.
Using a moulding remover D, detach the 2 claws and open the rear seat outer 3 point type belt shoulder anchor cover.
Loosen the bolt and disconnect the shoulder anchor of the rear seat outer 3 point type belt from the vehicle body.
| *1 | Bolt A |
| *2 | Bolt B |
Remove the bolt (A).
Loosen the bolt (B), detach the guide, and then remove the rear outer 3 point type belt assembly LH.