1.CHECK TRANSFER OIL
Remove the transfer case plug (filler plug) and transfer case gasket.
| *a | 0 to 5.0 mm (0 to 0.196 in.) |
Check that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.
If the result is not as specified, add transfer oil (Click hereDrivetrain>BF1B (TRANSFER / 4WD / AWD)>TRANSFER OIL>REPLACEMENT).
Too much or too little oil will lead to transfer problems.
When the oil level is too low, check for oil leaks.
Install a new transfer case gasket to the transfer case plug (filler plug) and then install the transfer case plug (filler plug).