Home › Drivetrain › BF1B (TRANSFER / 4WD / AWD) › TRANSFER INDICATOR SWITCH
RM25T0E _52 Drivetrain _030709 BF1B TRANSFER / 4WD / AWD _0142857 TRANSFER INDICATOR SWITCH G

BF1B TRANSFER / 4WD / AWD  TRANSFER INDICATOR SWITCH  INSPECTION  


PROCEDURE

Hide 84222 1.INSPECT NO. 1 TRANSFER INDICATOR SWITCH (4WD POSITION AND L4 POSITION)

a.

Inspect the No. 1 transfer indicator switch (4WD position).

i.
C311940C01
2.417,1.135 2.729,1.292 0.313,0.156 10 false *a 0.625,1.063 0.938,1.219 0.313,0.156 10 false *b 0.208,1.042 0.521,1.198 0.313,0.156 10 false *c
*a Component without harness connected
(No. 1 transfer indicator switch (4WD position))
*b Pushed
*c Released


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Pushed Below 1 Ω
Released 10 kΩ or higher


If the result is not as specified, replace the No. 1 transfer indicator switch (4WD position).



b.

w/ ABS:

Inspect the No. 1 transfer indicator switch (L4 position).

i.
C311941C01
2.323,1.125 2.635,1.281 0.313,0.156 10 false *a 0.677,1.01 0.99,1.167 0.313,0.156 10 false *b 0.25,1.01 0.563,1.167 0.313,0.156 10 false *c
*a Component without harness connected
(No. 1 transfer indicator switch (L4 position))
*b Pushed
*c Released


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Pushed Below 1 Ω
Released 10 kΩ or higher


If the resistance is not as specified, replace the No. 1 transfer indicator switch (L4 position).