33311A 1.INSTALL FRONT INPUT SHAFT BEARING
Using SST and a press, press in a new front input shaft bearing to the input shaft.
Install the front input shaft bearing so that the snap ring groove is on the front side.
33311B 2.INSTALL FRONT BEARING SHAFT SNAP RING
Select a front bearing shaft snap ring so that the clearance between the input shaft and front input shaft bearing is within the specification.
0.10 mm (0.00393 in.) or less
| Thickness |
|---|
| 2.10 mm (0.0827 in.) |
| 2.15 mm (0.0846 in.) |
| 2.20 mm (0.0866 in.) |
| 2.25 mm (0.0886 in.) |
| 2.30 mm (0.0906 in.) |
| 2.35 mm (0.0925 in.) |
| 2.40 mm (0.0945 in.) |
Using a snap ring expander, install the front bearing shaft snap ring.
33311D 3.INSTALL INPUT SHAFT BEARING
Apply gear oil to the input shaft bearing, and install it to the input shaft.