Home › Drivetrain › R151F (MANUAL TRANSMISSION / TRANSAXLE) › COUNTER GEAR
RM25T0E _52 Drivetrain _029903 R151F MANUAL TRANSMISSION / TRANSAXLE _0137557 COUNTER GEAR G

R151F MANUAL TRANSMISSION / TRANSAXLE  COUNTER GEAR  INSPECTION  


PROCEDURE

Hide 1.INSPECT COUNTER GEAR

a.
C314956N01
0.25,1.698 0.406,1.896 0.156,0.198 10 false A 2.698,1.677 2.854,1.875 0.156,0.198 10 false B

Using a micrometer, measure the outside diameter of the counter gear as shown in the illustration.

Measuring point Standard outside diameter Minimum outside diameter
A 24.85 to 24.95 mm (0.9784 to 0.9822 in.) 24.85 mm (0.9784 in.)
B 29.984 to 30.000 mm (1.1805 to 1.1811 in.) 29.984 mm (1.1805 in.)

If the outside diameter is less than the minimum, replace the counter gear with a new one.