33411A 1.INSTALL FRONT COUNTER GEAR BEARING
Using SST and a press, press in a new front counter gear bearing to the counter gear.
Install the front counter gear bearing so that the front No. 2 counter gear snap ring groove of the bearing faces forward.
33411Q 2.INSTALL FRONT NO. 2 COUNTER GEAR BEARING SNAP RING
Select a front No. 2 counter gear bearing snap ring so that the clearance between the counter gear and front No. 2 counter gear bearing snap ring is within the specification.
0.10 mm (0.00393 in.) or less
| Thickness |
|---|
| 2.10 mm (0.0827 in.) |
| 2.15 mm (0.0846 in.) |
| 2.20 mm (0.0866 in.) |
| 2.25 mm (0.0886 in.) |
| 2.30 mm (0.0906 in.) |
| 2.35 mm (0.0925 in.) |
Using a snap ring expander, install the front No. 2 counter gear bearing snap ring.