Home › Engine / Hybrid System › 1HZ (LUBRICATION) › OIL PRESSURE SENSOR
RM25T0E _51 Engine / Hybrid System _029209 1HZ LUBRICATION _0144778 OIL PRESSURE SENSOR G

1HZ LUBRICATION  OIL PRESSURE SENSOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 83520 1.INSPECT OIL PRESSURE SENDER GAUGE ASSEMBLY

a.

Disconnect the oil pressure sender gauge assembly connector.


b.
A326445C01
1.042,0.833 1.354,0.99 0.313,0.156 10 false *a
*a Test LED


Apply battery positive (+) voltage to the oil pressure sender gauge assembly terminal through a test LED.


c.

Check that the LED does not illuminate when the engine is stopped.


d.

Check that the LED flashes when the engine is running. The number of flashes varies with engine speed.

If the result is not as specified, replace the oil pressure sender gauge assembly.


e.

Connect the oil pressure sender gauge assembly connector.