Home › Engine / Hybrid System › 1HZ (LUBRICATION) › OIL PRESSURE SWITCH
RM25T0E _51 Engine / Hybrid System _029209 1HZ LUBRICATION _0133950 OIL PRESSURE SWITCH G

1HZ LUBRICATION  OIL PRESSURE SWITCH  INSPECTION  


PROCEDURE

Hide 83530 1.INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Disconnect the engine oil pressure switch assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Engine ground Engine stopped Below 1 Ω
Engine idling 10 kΩ or higher



c.

Connect the engine oil pressure switch assembly connector.