Home › Engine / Hybrid System › 1HZ (COOLING) › RADIATOR
RM25T0E _51 Engine / Hybrid System _029524 1HZ COOLING _0133827 RADIATOR A

1HZ COOLING  RADIATOR  DISASSEMBLY  


PROCEDURE

Hide 16454 1.REMOVE RADIATOR SIDE SUPPORT PLATE LH

a.
A161832

Remove the 4 bolts and radiator side support plate LH.


Hide 16453 2.REMOVE RADIATOR SIDE SUPPORT PLATE RH

a.
A161833

Remove the 4 bolts and radiator side support plate RH.


Hide 16400B 3.REMOVE RADIATOR DRAIN COCK PLUG

a.

Remove the radiator drain cock plug.


b.

Remove the O-ring.


Hide 4.ASSEMBLE SST

a.
A113337C16
2.344,0.719 2.583,0.333 2.583,0.333 2.75,0.333 false 2.167,1.583 2.333,1.583 2.333,1.583 2.823,1.073 true 0.333,2.833 0.5,2.833 0.5,2.833 0.656,2.5 false 1.167,2.917 1.333,2.917 1.333,2.917 1.479,2.542 true 0.375,1.333 0.688,1.49 0.313,0.156 10 false *a 2.771,0.25 3.083,0.406 0.313,0.156 10 false *b 2,1.5 2.313,1.656 0.313,0.156 10 false *c 0.167,2.75 0.479,2.906 0.313,0.156 10 false *d 2.469,2.802 2.781,2.958 0.313,0.156 10 false *e 0.865,2.833 1.323,3.031 0.458,0.198 10 false SST
*a Dimension B
*b Part A
*c Stopper Bolt
*d Claw
*e Overhaul Handle


Install the claw to part A of the overhaul handle as shown in the illustration.

SST
09230-01010  


b.

While squeezing the handle, adjust the stopper bolt so that dimension B is as specified below.

Dimension B:

0.2 to 0.3 mm (0.00787 to 0.0118 in.)



Hide 5.UNCAULK LOCK PLATE

a.
A163724C01
0.781,0.719 1.083,0.333 1.083,0.333 1.25,0.333 false 0.615,1.042 0.917,1.51 0.917,1.51 1.083,1.51 true 1.333,0.802 1.583,0.667 1.583,0.667 1.75,0.667 false 1.271,0.26 1.583,0.417 0.313,0.156 10 false *1 1.104,1.427 1.417,1.583 0.313,0.156 10 false *2 1.792,0.583 2.25,0.781 0.458,0.198 10 false SST
*1 Tank
*2 Lock Plate


Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt.

SST
09230-01010  


Hide 6.REMOVE UPPER AND LOWER RADIATOR TANK

a.
A163725C01
1.771,1.25 2.031,1.469 0.26,0.219 10 true *a
*a Tap


Lightly tap the bracket of the radiator (or inlet or outlet port of radiator) with a plastic-faced hammer and remove the upper and lower radiator tank.


b.

Remove the O-ring