Home › Engine / Hybrid System › 1VD-FTV (COOLING) › RADIATOR
RM25T0E _51 Engine / Hybrid System _029897 1VD-FTV COOLING _0136551 RADIATOR A

1VD-FTV COOLING  RADIATOR  DISASSEMBLY  


PROCEDURE

Hide 16454 1.REMOVE RADIATOR SIDE SUPPORT PLATE LH

a.
A164343

Remove the 4 bolts and radiator side support plate LH.


Hide 16453 2.REMOVE RADIATOR SIDE SUPPORT PLATE RH

a.
A161833

Remove the 4 bolts and radiator side support plate RH.


Hide 16400B 3.REMOVE RADIATOR DRAIN COCK PLUG

a.

Remove the radiator drain cock plug.


b.

Remove the O-ring.


Hide 4.ASSEMBLE SST

a.
A113337C15
1.5,2.521 1.615,2.677 1.615,2.677 1.615,2.781 true 0.552,2.49 0.375,2.74 0.375,2.74 0.375,2.792 false 2.354,0.708 2.656,0.281 2.656,0.281 2.75,0.281 false 2.844,1.042 2.51,1.51 2.51,1.51 2.51,1.615 true 2.813,0.219 3.24,0.385 0.427,0.167 10 false *a 2.417,1.625 2.698,1.865 0.281,0.24 10 false *c 0.396,1.333 0.604,1.531 0.208,0.198 10 false *b 1.458,2.823 1.781,3 0.323,0.177 10 false SST 2.406,2.833 2.708,3.073 0.302,0.24 10 false *e 0.323,2.813 0.719,3.01 0.396,0.198 10 false *d
*a Part A
*b Dimension B
*c Stopper Bolt
*d Claw
*e Overhaul Handle


Install the claw to part A of the overhaul handle as shown in the illustration.

SST
09230-01010  


b.

While squeezing the Overhaul Handle, adjust the stopper bolt so that dimension B is as specified below.

Dimension B:

0.2 to 0.3 mm (0.00787 to 0.0118 in.)



Hide 5.UNCAULK LOCK PLATE

a.
A336753C01
1.188,0.771 1.188,0.438 1.188,0.438 1.354,0.438 false 0.646,1.125 0.729,1.625 0.729,1.625 0.896,1.625 true 0.958,0.229 1.271,0.385 0.313,0.156 10 false *1 0.948,1.542 1.26,1.698 0.313,0.156 10 false *2 1.396,0.375 1.708,0.573 0.313,0.198 10 false SST
*1 Radiator Tank
*2 Lock Plate


Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt.

SST
09230-01010  


Hide 16441 6.REMOVE RADIATOR TANK

a.
A163725C01
1.771,1.25 2.031,1.469 0.26,0.219 10 true *a
*a Tap


Lightly tap the bracket of the radiator (or radiator hose inlet or outlet) with a plastic-faced hammer and remove the upper radiator tank and lower radiator tank.


b.

Remove the O-ring.