Home › Engine / Hybrid System › 1GR-FE (COOLING) › RADIATOR
RM25T0E _51 Engine / Hybrid System _029895 1GR-FE COOLING _0136491 RADIATOR A

1GR-FE COOLING  RADIATOR  DISASSEMBLY  


PROCEDURE

Hide 16454 1.REMOVE RADIATOR SIDE SUPPORT PLATE LH

a.
A336184

Remove the 4 bolts and radiator side support plate LH.


Hide 16453 2.REMOVE RADIATOR SIDE SUPPORT PLATE RH

a.
A336185

Remove the 4 bolts and radiator side support plate RH.


Hide 16400B 3.REMOVE RADIATOR DRAIN COCK PLUG

a.

Remove the radiator drain cock plug.


b.

Remove the O-ring.


Hide 4. ASSEMBLE SST

a.
A336186C01
3.135,1.646 3.135,1.25 3.135,1.25 2.927,1.156 true 2.365,0.781 2.563,0.448 2.563,0.448 2.719,0.448 false 0.49,3 0.646,3 0.646,3 0.729,2.573 false 1.208,3.01 1.375,3.01 1.375,3.01 1.49,2.594 true 0.385,1.385 0.583,1.583 0.198,0.198 10 false *a 3.063,1.667 3.26,1.865 0.198,0.198 10 false *c 0.292,2.896 0.49,3.094 0.198,0.198 10 false *d 2.75,0.344 2.948,0.542 0.198,0.198 10 false *b 2.365,2.906 2.563,3.104 0.198,0.198 10 false *e 0.917,2.917 1.26,3.115 0.344,0.198 10 false SST
*a Dimension B
*b Part A
*c Stopper Bolt
*d Claw
*e Overhaul Handle


Install the claw to part A of the overhaul handle as shown in the illustration.

SST
09230-01010  


b.

While squeezing the handle, adjust the stopper bolt so that dimension B is as specified below.

Dimension B:

0.2 to 0.3 mm (0.00787 to 0.0118 in.)



Hide 5.UNCAULK LOCK PLATE

a.
A336187C01
1.177,0.656 1.354,0.302 1.354,0.302 1.573,0.302 false 0.573,0.542 0.729,0.313 0.729,0.313 0.865,0.313 false 0.5,0.99 0.5,1.323 true 1.625,0.198 1.969,0.406 0.344,0.208 10 false SST 0.448,1.354 0.656,1.552 0.208,0.198 10 false *b 0.917,0.208 1.229,0.406 0.313,0.198 10 false *a
*a Tank
*b Lock Plate


Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt.

SST
09230-01010  


Hide 6.REMOVE UPPER AND LOWER RADIATOR TANK

a.
A336188C01
1.146,1.49 1.354,1.781 0.208,0.292 10 true *a
*a Tap


Lightly tap the bracket of the radiator (or inlet or outlet port of radiator) with a plastic-faced hammer and remove the upper and lower radiator tank.


b.

Remove the O-ring.