Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
73220 1.INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH
| *1 | Bolt A |
| *2 | Bolt B |
Attach the guide and temporarily install the front seat outer belt assembly LH with the bolt (A) and (B).
Tighten the bolt (A).
Tighten the bolt (B).
Connect the shoulder anchor of the front seat outer belt assembly LH with the bolt.
Attach the 2 claws to close the front seat outer belt shoulder anchor cover.
Connect the front seat belt anchor with the bolt.
Check that the front seat outer belt is not twisted.
62512 2.INSTALL QUARTER INSIDE TRIM BOARD LH
Install the quarter inside trim board LH with the 13 clips.
73298B 3.INSTALL QUARTER TRIM BELT HOLE COVER LH
Install the quarter trim belt hole cover LH with the 2 screws .
73299 4.INSTALL NO. 2 QUARTER TRIM BELT HOLE COVER LH
Install the No. 2 quarter trim belt hole cover LH with the 2 screws.