RM25T0E _V1 General _029810 SPECIFICATIONS _0146470 WIPER / WASHER F
SPECIFICATIONS WIPER / WASHER SERVICE DATA
FRONT WIPER SWITCH (for LHD, w/ intermittent)
| Connector Condition |
Tester Connection |
Switch Condition |
Specified Condition |
| Component without harness connected |
L23-3 (+1) - L23-1 (+S) |
OFF |
Below 1 Ω |
| INT |
| L23-3 (+1) - L23-2 (+B) |
MIST |
| LO |
| L23-4 (+2) - L23-2 (+B) |
HI |
FRONT WIPER SWITCH (for LHD, w/o intermittent)
| Connector Condition |
Tester Connection |
Switch Condition |
Specified Condition |
| Component without harness connected |
L23-3 (+1) - L23-1 (+S) |
OFF |
Below 1 Ω |
| L23-3 (+1) - L23-2 (+B) |
MIST |
| LO |
| L23-4 (+2) - L23-2 (+B) |
HI |
FRONT WIPER SWITCH (for RHD, w/ intermittent)
| Connector Condition |
Tester Connection |
Switch Condition |
Specified Condition |
| Component without harness connected |
L23-2 (+1) - L23-4 (+S) |
OFF |
Below 1 Ω |
| INT |
| L23-2 (+1) - L23-3 (+B) |
MIST |
| LO |
| L23-1 (+2) - L23-3 (+B) |
HI |
FRONT WIPER SWITCH (for RHD, w/o intermittent)
| Connector Condition |
Tester Connection |
Switch Condition |
Specified Condition |
| Component without harness connected |
L23-2 (+1) - L23-4 (+S) |
OFF |
Below 1 Ω |
| L23-2 (+1) - L23-3 (+B) |
MIST |
| LO |
| L23-1 (+2) - L23-3 (+B) |
HI |
FRONT WASHER SWITCH (for LHD)
| Connector Condition |
Tester Connection |
Switch Condition |
Specified Condition |
| Component without harness connected |
L22-3 (WF) - L22-2 (EW) |
ON |
Below 1 Ω |
| OFF |
10 kΩ or higher |
FRONT WASHER SWITCH (for RHD)
| Connector Condition |
Tester Connection |
Switch Condition |
Specified Condition |
| Component without harness connected |
L22-1 (WF) - L22-2 (EW) |
ON |
Below 1 Ω |
| OFF |
10 kΩ or higher |
REAR WIPER SWITCH (for LHD, w/ rear wiper)
| Connector Condition |
Tester Connection |
Switch Condition |
Specified Condition |
| Component without harness connected |
L22-6 (C1R) - L22-2 (EW) |
LO |
Below 1 Ω |
| L22-7 (+1R) - L22-2 (EW) |
HI |
L22-6 (C1R) - L22-2 (EW) L22-7 (+1R) - L22-2 (EW) |
OFF |
10 kΩ or higher |
REAR WIPER SWITCH (for RHD, w/ rear wiper)
| Connector Condition |
Tester Connection |
Switch Condition |
Specified Condition |
| Component without harness connected |
L22-5 (C1R) - L22-2 (EW) |
LO |
Below 1 Ω |
| L22-4 (+1R) - L22-2 (EW) |
HI |
L22-5 (C1R) - L22-2 (EW) L22-4 (+1R) - L22-2 (EW) |
OFF |
10 kΩ or higher |
REAR WASHER SWITCH (for LHD, w/ rear wiper)
| Connector Condition |
Tester Connection |
Switch Condition |
Specified Condition |
| Component without harness connected |
L23-5 (WR) - L22-2 (EW) |
ON |
Below 1 Ω |
| OFF |
10 kΩ or higher |
REAR WASHER SWITCH (for RHD, for LH Side)
| Connector Condition |
Tester Connection |
Switch Condition |
Specified Condition |
| Component without harness connected |
L23-10 (WR) - L22-2 (EW) |
ON |
Below 1 Ω |
| OFF |
10 kΩ or higher |
WIPER LOCK SWITCH (for Canvas Top)
| Connector Condition |
Tester Connection |
Condition |
Specified Condition |
| Component without harness connected |
1 - Switch body |
Pushed |
10 kΩ or higher |
| Not pushed |
Below 1 Ω |
OUT WIPER RELAY 1 (for Canvas Top)
| Connector Condition |
Tester Connection |
Condition |
Specified Condition |
| - |
3 - 4 |
Battery voltage not applied to terminals 1 and 2 |
Below 1 Ω |
| 3 - 5 |
10 kΩ or higher |
| 3 - 4 |
Battery voltage applied to terminals 1 and 2 |
10 kΩ or higher |
| 3 - 5 |
Below 1 Ω |
OUT WIPER RELAY 2 (for Canvas Top)
| Connector Condition |
Tester Connection |
Condition |
Specified Condition |
| - |
3 - 5 |
Battery voltage not applied to terminals 1 and 2 |
10 kΩ or higher |
| Battery voltage applied to terminals 1 and 2 |
Below 1 Ω |
WINDSHIELD WIPER RELAY (for 24 V Battery)
| Connector Condition |
Tester Connection |
Condition |
Specified Condition |
| - |
3 - 4 |
Battery voltage not applied to terminals 1 and 2 |
Below 1 Ω |
| 3 - 5 |
10 kΩ or higher |
| 3 - 4 |
Battery voltage applied to terminals 1 and 2 |
10 kΩ or higher |
| 3 - 5 |
Below 1 Ω |
WINDSHIELD WASHER RELAY (for 24 V Battery)
| Connector Condition |
Tester Connection |
Condition |
Specified Condition |
| - |
3 - 5 |
Battery voltage not applied to terminals 1 and 2 |
10 kΩ or higher |
| Battery voltage applied to terminals 1 and 2 |
Below 1 Ω |