Home › General › SPECIFICATIONS › PARKING BRAKE
RM25T0E _V1 General _029810 SPECIFICATIONS _0146478 PARKING BRAKE F

SPECIFICATIONS  PARKING BRAKE  SERVICE DATA  


Parking Brake System
Parking brake lever travel Pull the lever upward with a force of approximately 196 N (20 kgf, 44 lbf) and count the number of clicks 7 to 9 clicks (without rear brake dragging)

Parking Brake Assembly
Brake disc inside diameter Standard 210 mm (8.27 in.)
Maximum 211 mm (8.31 in.)
Parking brake shoe lining thickness Standard 4.0 mm (0.157 in.)
Maximum 1.0 mm (0.0394 in.)

Parking Brake Switch
Tester Connection Switch Condition Specified Condition
Switch connector terminal - Switch body On (Shaft not pressed) Below 1 Ω
Off (Shaft pressed) 10 kΩ or higher