Home › General › SPECIFICATIONS › LIGHTING (EXT)
RM25T0E _V1 General _029810 SPECIFICATIONS _0146484 LIGHTING (EXT) F

SPECIFICATIONS  LIGHTING (EXT)  SERVICE DATA  


HEADLIGHT DIMMER SWITCH (for LHD)
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected L24-18 (T) - L24-12 (EL) Light control switch off 10 kΩ or higher
L24-20 (H) - L24-12 (EL)
L24-18 (T) - L24-12 (EL) Light control switch tail position Below 1 Ω
L24-18 (T) - L24-12 (EL) Light control switch head position Below 1 Ω
L24-20 (H) - L24-12 (EL)
L24-17 (HF) - L24-12 (EL) Headlight dimmer switch flash position Below 1 Ω
L24-11 (HU) - L24-12 (EL)
L24-11 (HU) - L24-12 (EL) Headlight dimmer switch high position Below 1 Ω
L24-13 (TR) - L24-12 (EL) Turn signal switch neutral position 10 kΩ or higher
L24-15 (TL) - L24-12 (EL)
L24-13 (TR) - L24-12 (EL) Turn signal switch right turn position
(self cancel condition)
Below 1 Ω
Turn signal switch right turn position
(cancel ratchet operation condition)
L24-15 (TL) - L24-12 (EL) Turn signal switch left turn position
(self cancel condition)
Below 1 Ω
Turn signal switch left turn position
(cancel ratchet operation condition)
L24-4 (BFG) - L24-3 (LFG) Front fog light switch off 10 kΩ or higher
Front fog light switch on Below 1 Ω
L24-2 (B) - L24-3 (LFG) Rear fog light switch off 10 kΩ or higher
L24-4 (BFG) - L24-3 (LFG)
L24-2 (B) - L24-3 (LFG) Rear fog light switch on Below 1 Ω
L24-4 (BFG) - L24-3 (LFG)

HINT:
·

The self cancel condition indicates when the turn signal switch returns to the neutral position when releasing your hand from the switch (switch is operated within 7°).

·

The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even when releasing your hand (switch operation is 12°).



HEADLIGHT DIMMER SWITCH (for RHD)
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected L24-11 (H) - L24-19 (EL) Light control switch off 10 kΩ or higher
L24-13 (T) - L24-19 (EL)
L24-13 (T) - L24-19 (EL) Light control switch tail position Below 1 Ω
L24-11 (H) - L24-19 (EL) Light control switch head position Below 1 Ω
L24-13 (T) - L24-19 (EL)
L24-14 (HF) - L24-19 (EL) Headlight dimmer switch flash position Below 1 Ω
L24-20 (HU) - L24-19 (EL)
L24-20 (HU) - L24-19 (EL) Headlight dimmer switch high position Below 1 Ω
L24-16(TR) - L24-19(EL) Turn signal switch neutral position 10 kΩ or higher
L24-18 (TL) - L24-19 (EL)
L24-16 (TR) - L24-19 (EL) Turn signal switch right turn position
(self cancel condition)
Below 1 Ω
Turn signal switch right turn position
(cancel ratchet operation condition)
L24-18 (TL) - L24-19 (EL) Turn signal switch left turn position
(self cancel condition)
Below 1 Ω
Turn signal switch left turn position
(cancel ratchet operation condition)
L24-7 (BFG) - L24-8 (LFG) Front fog light switch off 10 kΩ or higher
Front fog light switch on Below 1 Ω

HINT:
·

The self cancel condition indicates when the turn signal switch returns to the neutral position when releasing your hand from the switch (switch is operated within 7°).

·

The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even when releasing your hand (switch operation is 12°).



HAZARD WARNING SWITCH (for 12 V Battery)
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected L14-5 (F) - L14-6 (E) Hazard warning signal switch off 10 kΩ or higher
Hazard warning signal switch on Below 1 Ω

HAZARD WARNING SWITCH (for Canvas Top)
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected M1-5 (F) - M1-6 (E) Hazard warning signal switch off 10 kΩ or higher
Hazard warning signal switch on Below 1 Ω

HAZARD WARNING SWITCH (for 24 V Battery)
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected L14-1 (TL) - L14-4 (E) Hazard warning signal switch off 10 kΩ or higher
L14-2 (TR) - L14-4 (E)
L14-1 (TL) - L14-4 (E) Hazard warning signal switch on Below 1 Ω
L14-2 (TR) - L14-4 (E)

HEADLIGHT LEVELING SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component with harness connected L15-4 (LH 0) - L15-1 (E)
L15-5 (RH 0) - L15-1 (E)
0 10.44 to 11.16 V
1 9.16 to 9.88 V
2 7.88 to 8.6 V
3 6.6 to 7.32 V
4 5.32 to 6.04 V
5 4.04 to 4.76 V

STOP LIGHT SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected I19-1 - I19-2 Shaft not pushed 10 kΩ or higher
Shaft pushed Below 1 Ω
I19-3 - I19-4* Shaft not pushed Below 1 Ω
Shaft pushed 10 kΩ or higher

*: for Brake Override System

TURN SIGNAL FLASHER ASSEMBLY (for 12 V Battery)
Connector Condition Tester Connection Switch Condition Specified Condition
Component with harness connected I28-2 (LR) - I28-7 (E) Hazard warning switch off Below 1 V
Hazard warning switch on Alternating between 11 to 14 V and below 1 V
(60 to 120 times per minute)
Turn signal switch right turn position Alternating between 11 to 14 V and below 1 V
(60 to 120 times per minute)
I28-3 (LL) - I28-7 (E) Hazard warning switch off Below 1 V
Hazard warning switch on Alternating between 11 to 14 V and below 1 V
(60 to 120 times per minute)
Turn signal switch left turn position Alternating between 11 to 14 V and below 1 V
(60 to 120 times per minute)
I28-5 (EL) - I28-7 (E) Turn signal switch neutral position 9 V or higher
Turn signal switch left turn position Below 1 V
I28-6 (ER) - I28-7 (E) Turn signal switch neutral position 9 V or higher
Turn signal switch right turn position Below 1 V
I28-8 (HAZ) - I28-7 (E) Hazard warning switch off 9 V or higher
Hazard warning switch on Below 1 V

TURN SIGNAL FLASHER ASSEMBLY (for 24 V Battery)
Connector Condition Tester Connection Switch Condition Specified Condition
Component with harness connected I29-2 (FR) - Body ground Hazard warning switch off Below 1 V
Hazard warning switch on Alternating between 11 to 14 V and below 1 V
(60 to 120 times per minute)
Turn signal switch right turn position Alternating between 11 to 14 V and below 1 V
(60 to 120 times per minute)
I29-3 (LL) - Body ground Hazard warning switch off Below 1 V
Hazard warning switch on Alternating between 11 to 14 V and below 1 V
(60 to 120 times per minute)
Turn signal switch left turn position Alternating between 11 to 14 V and below 1 V
(60 to 120 times per minute)
I29-5 (ER) - Body ground Turn signal switch neutral position 9 V or higher
Turn signal switch right turn position Below 1 V
I29-6 (EL) - Body ground Turn signal switch neutral position 9 V or higher
Turn signal switch left turn position Below 1 V

RELAY (TAIL Relay, for LHD)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω

RELAY (TAIL Relay, for RHD)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω

RELAY (H-LP Relay, for LHD)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω

RELAY (H-LP Relay, for RHD)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω

RELAY (DIM Relay, for LHD)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 4 Battery voltage not applied to terminals 1 and 2 Below 1 Ω
Battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω

RELAY (DIM Relay, for RHD)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 4 Battery voltage not applied to terminals 1 and 2 Below 1 Ω
Battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω

RELAY (FR FOG Relay, for LHD)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω

RELAY (FR FOG Relay, for RHD)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω

RELAY (RR FOG Relay)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω

RELAY (FLSH Relay, FLSH 2 Relay)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω