RM25T0E _V1 General _029810 SPECIFICATIONS _0146737 POWER ASSIST SYSTEMS F
SPECIFICATIONS POWER ASSIST SYSTEMS SERVICE DATA
Power Steering Fluid
| Fluid level rise (Maximum) |
5.0 mm (0.197 in.) |
| Fluid pressure at idle speed with valve closed |
for 1GR-FE, 1HZ |
8800 to 9500 kPa (89.8 to 96.8 kgf/cm2, 1276 to 1377 psi) |
| for 1VD-FTV |
9300 to 10000 kPa (94.9 to 101.9 kgf/cm2,1349 to 1450 psi) |
| Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position |
for 1GR-FE, 1HZ |
8800 to 9500 kPa (89.8 to 96.8 kgf/cm2, 1276 to 1377 psi) |
| for 1VD-FTV |
9300 to 10000 kPa (94.9 to 101.9 kgf/cm2,1349 to 1450 psi) |
Vane Pump (for 1GR-FE)
| Vane pump shaft and vane pump housing oil clearance (Maximum) |
0.07 mm (0.00276 in.) |
| Vane plate thickness (Standard) |
1.405 to 1.411 mm (0.0554 to 0.0555 in.) |
| Clearance between the vane pump rotor groove and vane pump plate (Maximum) |
0.03 mm (0.00118 in.) |
| Flow control valve compression spring minimum free length |
31.95 mm (1.26 in.) |
| Vane pump rotating torque |
0.3 N*m (3 kgf*cm, 2 in.*lbf) or less |
Vane Pump (except 1GR-FE)
| Vane pump shaft and vane pump housing oil clearance (Maximum) |
0.08 mm (0.00315 in.) |
| Vane plate thickness (Standard) |
1.405 to 1.411 mm (0.0554 to 0.0555 in.) |
| Clearance between the vane pump rotor groove and vane pump plate (Maximum) |
0.03 mm (0.00118 in.) |
| Flow control valve compression spring minimum free length |
31.95 mm (1.26 in.) |
| Vane pump rotating torque |
0.27 N*m (2.8 kgf*cm, 2.4 in.*lbf) or less |