75597 1.REMOVE ROOF DRIP SIDE FINISH MOULDING JOINT COVER LH
Use the same procedure for all roof drip side finsh moulding joint covers.
Insert the SST to the bottom side of the roof drip side finish moulding joint cover LH and remove it.
75596 2.REMOVE ROOF DRIP SIDE FINISH MOULDING JOINT COVER RH
Use the same procedure described for the LH side.
75552 3.REMOVE ROOF DRIP SIDE FINISH MOULDING LH
except Single Cab:
Insert the SST to the bottom side of the roof drip side finish moulding LH and remove it.
for Single Cab:
Insert the SST to the bottom side of the roof drip side finish moulding LH and remove it.
75551 4.REMOVE ROOF DRIP SIDE FINISH MOULDING RH
Use the same procedure described for the LH side.
75554A 5.REMOVE REAR ROOF DRIP SIDE FINISH MOULDING LH
except Double Cab:
Insert the SST to the bottom side of the roof drip side finish moulding LH and remove it.
for Double Cab:
Insert the SST to the bottom side of the roof drip side finish moulding LH and remove it.
75553A 6.REMOVE REAR ROOF DRIP SIDE FINISH MOULDING RH
Use the same procedure described for the LH side.
75586A 7.REMOVE REAR ROOF DRIP MOULDING (for Van)
Insert the SST to the bottom side of the roof drip side finish moulding LH and remove it.
75056C 8.REMOVE REAR ROOF DRIP SIDE FINISH MOULDING SUB-ASSEMBLY LH (for Pickup)
Insert the SST to the bottom side of the rear roof drip side finish moulding sub-assembly LH and remove it.
75055C 9.REMOVE REAR ROOF DRIP SIDE FINISH MOULDING SUB-ASSEMBLY RH (for Pickup)
Use the same procedure described for the LH side.