75056C 1.INSTALL REAR ROOF DRIP SIDE FINISH MOULDING SUB-ASSEMBLY LH (for Pickup)
Suspend the upper side of the rear roof drip side finish moulding sub-assembly LH to the roof drip and tip it on by hand.
75055C 2.INSTALL REAR ROOF DRIP SIDE FINISH MOULDING SUB-ASSEMBLY RH (for Pickup)
Use the same procedure described for the LH side.
75586A 3.INSTALL REAR ROOF DRIP MOULDING (for Van)
Suspend the upper side of the rear roof drip moulding to the roof drip and tip it on by hand.
75554A 4.INSTALL REAR ROOF DRIP SIDE FINISH MOULDING LH
except Double Cab:
Suspend the upper side of the rear roof drip side finish moulding LH to the roof drip and tip it on by hand.
for Double Cab:
Suspend the upper side of the rear roof drip side finish moulding LH to the roof drip and tip it on by hand.
75553A 5.INSTALL REAR ROOF DRIP SIDE FINISH MOULDING RH
Use the same procedure described for the LH side.
75552 6.INSTALL ROOF DRIP SIDE FINISH MOULDING LH
except Single Cab:
Suspend the upper side of the roof drip side finish moulding LH to the roof drip and tip it on by hand.
for Single Cab:
Suspend the upper side of the roof drip side finish moulding LH to the roof drip and tip it on by hand.
75551 7.INSTALL ROOF DRIP SIDE FINISH MOULDING RH
Use the same procedure described for the LH side.
75597 8.INSTALL ROOF DRIP SIDE FINISH MOULDING JOINT COVER LH
Use the same procedure for all roof drip side finsh moulding joint covers.
Install the roof drip side finish moulding joint cover LH.
75596 9.INSTALL ROOF DRIP SIDE FINISH MOULDING JOINT COVER RH
Use the same procedure described for the LH side.