84210 1.INSPECT BACK-UP LIGHT SWITCH ASSEMBLY
| *a | Component without harness connected: (Back-up light Switch Assembly) |
| *b | 26.18 to 27.82 mm (1.031 to 1.095 in.) |
|
Pushed (ON) |
|
Released (OFF) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Pushed | Below 1 Ω |
| 1 - 2 | Released | 10 kΩ or higher |
If the result is not as specified, replace the back-up light switch assembly.