33411A 1.INSTALL FRONT COUNTER GEAR BEARING OR ROLLER
Using SST and a press, press in a new front counter gear bearing or roller to the counter gear.
Install the front counter gear bearing or roller so that the front No. 1 counter gear bearing snap ring groove of the bearing faces forward.
33411D 2.INSTALL FRONT NO. 1 COUNTER GEAR BEARING SNAP RING
Select a new front No. 1 counter gear bearing snap ring that will allow minimum clearance.
| Mark | Thickness |
|---|---|
| A | 2.45 to 2.50 mm (0.0965 to 0.0984 in.) |
| B | 2.50 to 2.55 mm (0.0985 to 0.1003 in.) |
| C | 2.55 to 2.60 mm (0.1004 to 0.1023 in.) |
| D | 2.60 to 2.65 mm (0.1024 to 0.1043 in.) |
| E | 2.65 to 2.70 mm (0.1044 to 0.1062 in.) |
| F | 2.70 to 2.75 mm (0.1063 to 0.1082 in.) |
Using a snap ring expander, install the front No. 1 counter gear bearing snap ring.
After installation, make sure that the front counter gear bearing or roller move smoothly.