Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
84233 1.INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (w/o Curtain Shield Airbag)
| *a | Component without harness connected (Front Door Courtesy Light Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| Terminal 1 - Switch body | Pushed | 10 kΩ or higher |
| Not pushed | Below 1 Ω |
If the result is not as specified, replace the front door courtesy light switch assembly.
84233 2.INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (w/ Curtain Shield Airbag)
| *a | Component without harness connected (Front Door Courtesy Light Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| Terminal 1 - Switch body | Pushed | 10 kΩ or higher |
| Not pushed | Below 1 Ω |
If the result is not as specified, replace the front door courtesy light switch assembly.