04493 1.INSTALL BRAKE MASTER CYLINDER KIT
|
Lithium soap base glycol grease |
Apply a light coat of lithium soap base glycol grease to the rubber parts as shown in the illustration.
Install the No. 2 piston to the master cylinder body.
Insert the piston straight so that the inside of the cylinder is not damaged.
With the piston pushed in, insert the straight pin into the port of the reservoir installation area.
Make sure that the straight pin and piston are securely installed.
With the piston pushed in, install a new snap ring using snap ring pliers.
47299 2.INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER
Install the brake master cylinder reservoir strainer to the brake master cylinder reservoir assembly.
47230 3.INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
Install the brake master cylinder reservoir filler cap assembly to the brake master cylinder reservoir assembly.
47287 4.INSTALL BRAKE FLUID INFORMATION LABEL
47255 5.INSTALL MASTER CYLINDER RESERVOIR GROMMET
|
Lithium soap base glycol grease |
Apply a light coat of lithium soap base glycol grease to 2 new master cylinder reservoir grommets.
Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir assembly.
47202 6.INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
Install the brake master cylinder reservoir sub-assembly to the master cylinder body.
Install the screw.