1.REMOVE FRONT WHEEL
2.REMOVE SKID CONTROL SENSOR WIRE LH
Disconnect the connector.
Remove the bolt and harness clamp.
Remove the bolt and harness clamp.
| *A | for Type A | *B | for Type B |
Remove the bolt and harness clamp.
| *A | for Type A | *B | for Type B |
Disconnect the front speed sensor connector.
Detach the connector clamp.
Remove the 2 bolts and 2 harness clamps.
3.REMOVE SKID CONTROL SENSOR WIRE RH
Disconnect the connector.
| *A | for Type A | *B | for Type B |
for Type A:
Remove the bolt and harness clamp.
Remove the bolt and harness clamp.
| *A | for Type A | *B | for Type B |
Remove the bolt and harness clamp.
| *A | for Type A | *B | for Type B |
Disconnect the front speed sensor connector.
Detach the connector clamp.
Remove the 2 bolts and 2 harness clamps.
89543 4.REMOVE FRONT SPEED SENSOR LH
Remove the nut and front speed sensor LH.
Keep the sensor tip and sensor installation hole free from foreign matter.
5.INSTALL FRONT SPEED SENSOR RH
Remove the nut and front speed sensor RH.
Keep the sensor tip and sensor installation hole free from foreign matter.