Home › Brake › BRAKE (REAR) › REAR BRAKE FLEXIBLE HOSE (for Rear Disc Brake) › from 2016.08
RM25T0E _54 Brake _029918 BRAKE (REAR) _0138484 REAR BRAKE FLEXIBLE HOSE(for Rear Disc Brake) A

BRAKE (REAR)  REAR BRAKE FLEXIBLE HOSE(for Rear Disc Brake)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL NO. 5 FLEXIBLE HOSE BRACKET (w/o ABS, VSC)

a.

Install the No. 5 flexible hose bracket to the frame with the bolt.

C363075C01
0.083,0.083 0.458,0.323 0.375,0.24 12 false *A 3.667,0.094 4.042,0.333 0.375,0.24 12 false *B
*A except Short Body *B for Short Body


Torque:
31 N*m (316 kgf*cm, 23 ft.*lbf)


Hide 2.INSTALL NO. 5 FLEXIBLE HOSE BRACKET (w/ VSC)

a.
C363069

Install the No. 5 flexible hose bracket to the frame with the bolt.

Torque:
31 N*m (316 kgf*cm, 23 ft.*lbf)


Hide 3.INSTALL REAR FLEXIBLE HOSE (w/ VSC)

a.
C363072C01
2.865,1.625 3.094,1.823 0.229,0.198 10 true *a
*a Torque Wrench Fulcrum Length


Connect the rear flexible hose to the connecting point with each brake tube, and then install 2 new clips.


b.

Using a union nut wrench, connect each brake tube to the rear flexible hose while holding the rear flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.866 in.)) + torque wrench (fulcrum length of 300 mm (11.811 in.)): 14.2 N*m (145 kgf*cm, 10 ft.*lbf).




c.
C363071C01
0.542,1.917 0.771,2.135 0.229,0.219 10 true *a
*a Torque Wrench Fulcrum Length


Connect the rear flexible hose to the connecting point with each brake tube, and then install 2 new clips.


d.

Using a union nut wrench, connect each brake tube to the rear flexible hose while holding the rear flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.866 in.)) + torque wrench (fulcrum length of 300 mm (11.811 in.)): 14.2 N*m (145 kgf*cm, 10 ft.*lbf).




Hide 47319F 4.INSTALL REAR FLEXIBLE HOSE (w/o ABS, VSC)

a.
C363070C01
0.938,0.49 1.25,0.688 0.313,0.198 10 false *a
*a Torque Wrench Fulcrum Length


Attach a new clip to the flexible hose.


b.

Connect the flexible hose to the 3-way.

Torque:
23 N*m (235 kgf*cm, 17 ft.*lbf)


c.

Using a union nut wrench, connect the flexible hose to the brake tube while holding the flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf).



NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube and 3-way from the connecting points.




Hide 47319F 5.INSTALL REAR FLEXIBLE HOSE LH

NOTICE:

When replacing both the left and right rear flexible hoses, as the left and right hoses each have a different shape, be sure to check the part number to confirm whether the hose is the left or right one before installing it.


a.
C310934

Connect the flexible hose with a new gasket and a new union bolt to the disc brake cylinder.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


b.
C312818

Set the flexible hose into place at the connecting point with the brake tube, and then install a new clip.


c.
C363076C01
1.677,0.281 1.99,0.479 0.313,0.198 10 false *a
*a Torque Wrench Fulcrum Length


Using a union nut wrench, connect the flexible hose to the brake tube while holding the flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)



NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube and 3-way from the connecting points.




Hide 7.BLEED CLUTCH LINE