1.INSTALL NO. 5 FLEXIBLE HOSE BRACKET (w/o ABS, VSC)
Install the No. 5 flexible hose bracket to the frame with the bolt.
| *A | except Short Body | *B | for Short Body |
47319F 2.INSTALL REAR FLEXIBLE HOSE LH
| *a | Torque Wrench Fulcrum Length |
Attach a new clip to the rear flexible hose.
Connect the rear flexible hose to the 3-way.
Using a union nut wrench, connect the rear flexible hose to the brake tube while holding the rear flexible hose with a wrench.
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)
Do not bend or damage the brake tube.
Do not allow any foreign matter such as dirt and dust to enter the brake tube and 3-way from the connecting points.
3.BLEED BRAKE LINE
w/o VSC:
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (w/o VSC)>BLEEDING
w/o ABS:
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (w/o ABS)>BLEEDING
4.BLEED CLUTCH LINE
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING