Home › Brake › BRAKE (FRONT) › FRONT BRAKE FLEXIBLE HOSE (w/o VSC) › from 2016.08
RM25T0E _54 Brake _029917 BRAKE (FRONT) _0283239 FRONT BRAKE FLEXIBLE HOSE(w/o VSC) A

BRAKE (FRONT)  FRONT BRAKE FLEXIBLE HOSE(w/o VSC)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 47313A 3.REMOVE FRONT FLEXIBLE HOSE LH

C271310

a.

Remove the union bolt and gasket and disconnect the front flexible hose LH.


b.
C271311

Using a union nut wrench, disconnect the brake line while holding the front flexible hose LH with a wrench.

NOTICE:
·

Do not kink or damage the brake line.

·

Do not allow any foreign matter such as dirt or dust to enter the brake line.




c.

Remove the clip and front flexible hose LH.


Hide 47313A 4.REMOVE FRONT FLEXIBLE HOSE (for 1HZ, 1VD-FTV)

a.
C271313

Using a union nut wrench, disconnect the 4 brake lines while holding the front flexible hose with a wrench.

NOTICE:
·

Do not kink or damage the brake line.

·

Do not allow any foreign matter such as dirt or dust to enter the brake line.




b.

Remove the 4 clips and 2 front flexible hoses.


Hide 47313A 5.REMOVE FRONT FLEXIBLE HOSE (for 1GR-FE)

C271312

a.

Using a union nut wrench, disconnect the 4 brake lines while holding the front flexible hose with a wrench.

NOTICE:
·

Do not kink or damage the brake line.

·

Do not allow any foreign matter such as dirt or dust to enter the brake line.




b.

Remove the 4 clips and 2 front flexible hoses.