Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
63310 1.INSTALL ROOF HEADLINING ASSEMBLY
w/o Knee Airbag:
Place the roof headlining assembly into the vehicle through the front door.
Check that the corners of the roof headlining assembly are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.
Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.
Do not damage the roof headlining assembly or vehicle interior.
Install the roof headlining assembly with the 8 clips.
w/ Driver Side Knee Airbag:
Place the roof headlining assembly into the vehicle through the front door.
Check that the corners of the roof headlining assembly are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.
Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.
Do not damage the roof headlining assembly or vehicle interior.
Install the roof headlining assembly with the 4 clips.
74348 2.INSTALL VISOR HOLDER
Use the same procedure for both visor holders.
Attach the clip to install the visor holder.
Install the screw.
74320 3.INSTALL VISOR ASSEMBLY LH
Install the visor assembly LH with the 2 screws.
74310 4.INSTALL VISOR ASSEMBLY RH
Use the same procedure described for the LH side.
81290 5.INSTALL NO. 3 ROOM LIGHT ASSEMBLY
87810 6.INSTALL INNER REAR VIEW MIRROR ASSEMBLY
87834 7.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER
87827 8.INSTALL INNER REAR VIEW MIRROR ABSORBER
74610A 9.INSTALL ASSIST GRIP SUB-ASSEMBLY
Install the assist grip sub-assembly with the 2 screws.
74617C 10.INSTALL ASSIST GRIP PLUG
Use the same procedure for all assist grip plugs.
Attach the 2 claws to install the assist grip plug.
73024 11.INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH (w/ Driver Side Knee Airbag)
Attach the 6 guides to install the front shoulder belt anchor plate sub-assembly LH.
73023 12.INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH (w/ Driver Side Knee Airbag)
Use the same procedure described for the LH side.
62412 13.INSTALL CENTER PILLAR GARNISH LH
| *a | String |
Apply a string along the back window glass weatherstrip groove, as shown in the illustration.
w/o Knee Airbag:
Attach the 5 clips to temporarily install the center pillar garnish LH.
Install the 3 clips.
Connect the front seat belt floor anchor with the bolt.
Connect the front seat belt shoulder anchor with the bolt.
Attach the 2 claws to close the front seat belt shoulder anchor cover.
w/ Driver Side Knee Airbag:
Install the 2 clips to the center pillar garnish LH.
Attach the 8 clips to install the center pillar garnish LH.
Install the 2 clips.
Connect the front seat belt floor anchor with the bolt.
| *a | String |
While pressing the center pillar garnish LH by hand, using a string, pull out the lip groove of the back door weatherstrip towards the vehicle interior.
62411 14.INSTALL CENTER PILLAR GARNISH RH
Use the same procedure described for the LH side.
58707A 15.INSTALL JACK HOLDER SUB-ASSEMBLY (w/o Knee Airbag)
Install the jack holder sub-assembly with the 2 bolts.
73174 16.INSTALL FRONT SEAT BELT HOLE COVER LH (w/o Knee Airbag)
Attach the 2 guides and 2 claws to install the front seat belt hole cover LH.
73173 17.INSTALL FRONT SEAT BELT HOLE COVER RH (w/o Knee Airbag)
Use the same procedure described for the LH side.
62212 18.INSTALL FRONT PILLAR GARNISH LH
w/o Knee Airbag:
Attach the clip and claw to install the front pillar garnish LH.
w/ Driver Side Knee Airbag:
Install the clip to the vehicle side.
Temporarily install the front pillar garnish LH as indicated by the arrow shown in the illustration.
Attach the clip to install the front pillar garnish LH.
62211 19.INSTALL FRONT PILLAR GARNISH RH
w/o Knee Airbag:
Use the same procedure described for the LH side.
w/ Driver Side Knee Airbag:
Use the same procedure described for the LH side.
w/o Assist Grip:
Attach the clip and claw to install the front pillar garnish LH.
Install the 2 clips.
74603 20.INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY
Use the same procedure for both front assist grip sub-assemblies.
Install the front assist grip sub-assembly with the 2 screws.
74617A 21.INSTALL ASSIST GRIP PLUG
Use the same procedure for all assist grip plugs.
Attach the 2 claws to install the assist grip plug.
55356B 22.INSTALL INSTRUMENT PANEL PLATE LH
55355B 23.INSTALL INSTRUMENT PANEL PLATE RH
62316C 24.INSTALL FRONT DOOR REAR OPENING TRIM WEATHERSTRIP LH
Install the front door rear opening trim weatherstrip LH.
62315E 25.INSTALL FRONT DOOR REAR OPENING TRIM WEATHERSTRIP RH
Use the same procedure described for the LH side.
62112A 26.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
Attach the clip to install the cowl side trim sub-assembly LH.
Install the cap nut.
62111A 27.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
67914 28.INSTALL FRONT DOOR SCUFF PLATE LH
Install the front door scuff plate LH with the 4 screws.
67913 29.INSTALL FRONT DOOR SCUFF PLATE RH
Use the same procedure described for the LH side.