Home › Vehicle Exterior › DOOR / HATCH › HOOD › from 2016.08
RM25T0E _59 Vehicle Exterior _029937 DOOR / HATCH _0137860 HOOD A

DOOR / HATCH  HOOD  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE CUSHION

a.

Remove the 2 cushions.


Hide 53381 2.REMOVE HOOD TO RADIATOR SUPPORT SEAL

a.
B168530

Using a clip remover, detach the 8 clips and remove the hood to radiator support seal.


Hide 53341B 3.REMOVE HOOD INSULATOR (w/ Hood Insulator)

a.
B168014

w/o Hood Bulge:

i.

Using a clip remover, detach the 12 clips and remove the hood insulator.



b.

w/ Hood Bulge, w/o Cruise Control System:

i.
B168006

Using a clip remover, detach the 11 clips and remove the hood insulator.



c.

w/ Hood Bulge, w/ Cruise Control System:

i.
B454443

Using a clip remover, detach the 10 clips and remove the hood insulator.



Hide 53390 4.REMOVE WINDSHIELD REST CRADLE ASSEMBLY (for Canvas Top)

a.
B168009

Remove the 4 nuts and 2 windshield rest cradle assemblies.


Hide 85035 5.REMOVE WASHER NOZZLE SUB-ASSEMBLY

Hide 6.DISCONNECT WASHER HOSE ASSEMBLY

a.
B382325

Detach the 4 clamps and disconnect the washer hose assembly.


Hide 76181 7.REMOVE HOOD BULGE (w/ Hood Bulge)

a.
B168007

Remove the 7 nuts and hood bulge.


Hide 76187 8.REMOVE NO. 1 HOOD AIR INTAKE GUIDE RETAINER (w/ Hood Bulge)

a.

Remove the screw and No. 1 hood air intake guide retainer from the hood bulge.


Hide 76109 9.REMOVE HOOD AIR INTAKE GUIDE SUB-ASSEMBLY (w/ Hood Bulge)

a.
B168008

Using a clip remover, detach the 9 clips and remove the hood air intake guide sub-assembly.