A bolt without a torque specification is shown in the standard bolt chart.
76109 1.INSTALL HOOD AIR INTAKE GUIDE SUB-ASSEMBLY (w/ Hood Bulge)
Attach the 9 clips to install the hood air intake guide sub-assembly.
76187 2.INSTALL NO. 1 HOOD AIR INTAKE GUIDE RETAINER (w/ Hood Bulge)
Install the No. 1 hood air intake guide retainer with the screw to the hood bulge.
76181 3.INSTALL HOOD BULGE (w/ Hood Bulge)
Install the hood bulge with the 7 nuts.
4.CONNECT WASHER HOSE ASSEMBLY
Connect the washer hose assembly with the 4 clamps.
85035 5.INSTALL WASHER NOZZLE SUB-ASSEMBLY
85035 6.INSPECT WASHER NOZZLE SUB-ASSEMBLY
for RHD, w/o Cruise Control System:
Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE(for Front Side)>ON-VEHICLE INSPECTION
for RHD, w/ Cruise Control System:
Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE(for Front Side)>ON-VEHICLE INSPECTION
85035 7.ADJUST WASHER NOZZLE SUB-ASSEMBLY
53390 8.INSTALL WINDSHIELD REST CRADLE ASSEMBLY (for Canvas Top)
Install the 4 nuts and 2 windshield rest cradle assemblies.
53341B 9.INSTALL HOOD INSULATOR (w/ Hood Insulator)
w/o Hood Bulge:
Attach the 12 clips to install the hood insulator.
w/ Hood Bulge, w/o Cruise Control System:
Attach the 11 clips to install the hood insulator.
w/ Hood Bulge, w/ Cruise Control System:
Attach the 10 clips to install the hood insulator.
53381 10.INSTALL HOOD TO RADIATOR SUPPORT SEAL
Attach the 8 clips to install the hood to radiator support seal.
11.INSTALL CUSHION
Install the 2 cushions.