Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM › 2016.08–2022.09
RM25T0E _58 Vehicle Interior _029929 SUPPLEMENTAL RESTRAINT SYSTEMS _0138307 AIRBAG SYSTEM C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  B1000/31  Center Airbag Sensor Assembly Malfunction  


DESCRIPTION

The airbag sensor assembly consists of a deceleration sensor, safing sensor, drive circuit, TC and CG terminal circuit, ignition control, etc.

If the airbag sensor assembly receives signals from the deceleration sensor, it determines whether or not the SRS should be activated.

DTC B1000/31 is stored when a malfunction is detected in the airbag sensor assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area
B1000/31 Center Airbag Sensor Assembly Malfunction An airbag sensor assembly malfunction. Airbag sensor assembly

CAUTION / NOTICE / HINT

NOTICE:

After replacing the airbag sensor assembly, refer to initialization.*

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION

*: w/ VSC


PROCEDURE

1.CHECK DTC
a.

Check for DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Trouble Codes
50001 63
Result:
Proceed to
DTC B1000/31 is output
DTC B1000/31 and other DTCs are output


NOTICE:

If only DTC B1000/31 is output, do not clear the DTCs. Replace the airbag sensor assembly.


HINT:

If any DTCs other than DTC B1000/31 are also output, troubleshoot those DTCs first.




DTC B1000/31 is output

DTC B1000/31 and other DTCs are output