Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › from 2016.08
RM25T0E _51 Engine / Hybrid System _057930 CRUISE CONTROL _0287962 CRUISE CONTROL SYSTEM U

CRUISE CONTROL  CRUISE CONTROL SYSTEM  TERMINALS OF ECM  


CHECK ECM


A163584E06
2.396,0.188 2.906,0.5 0.51,0.313 2.396,0.188 2.906,0.5 0.51,0.313 5.531,0.188 6.042,0.5 0.51,0.313 2.521,0.26 2.823,0.438 0.302,0.177 10 false C39 5.667,0.271 5.938,0.479 0.271,0.208 10 false A29

HINT:

The standard normal voltage between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated.

The result of the checks should be compared with the standard normal voltage for that pair of terminals, which is displayed in the Specified Condition column.

The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C39-81 (E1) - Body ground BR - Body ground Ground Always Below 1 Ω
C39-28 (CLSW) - C39-81 (E1) P-B - BR Clutch switch assembly signal Ignition switch ON, clutch pedal depressed 11 to 14 V
Ignition switch ON, clutch pedal released Below 1 V
A29-40 (CCS) - C39-81 (E1) L - BR Cruise control main switch circuit Cruise control main switch off 10 kΩ or higher
Cruise control main switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω
A29-13 (STP) - C39-81 (E1) W - BR Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V
A29-35 (ST1-) - C39-81 (E1) R-L - BR Stop light switch assembly signal Ignition switch ON, brake pedal depressed Below 1.5 V
Ignition switch ON, brake pedal released 7.5 to 14 V