Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › from 2016.08
RM25T0E _51 Engine / Hybrid System _057930 CRUISE CONTROL _0287962 CRUISE CONTROL SYSTEM D

CRUISE CONTROL  CRUISE CONTROL SYSTEM  FREEZE FRAME DATA  


CHECK FREEZE FRAME DATA (READ BY GTS)


HINT:

The ECU data indicating the vehicle status is stored in the ECU as freeze frame data simultaneously as the DTC is stored.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

Powertrain > Cruise Control > Trouble Codes
50001 237

e.

From the DTC screen, select the DTC (snow icon displayed) to which freeze frame data is recorded.



LIST OF FREEZE FRAME DATA


Powertrain > Cruise Control
Tester Display Measurement Item Range Normal Condition Diagnostic Note
CCS Vehicle Spd Vehicle speed Min.: 0 km/h (0 mph)
Max.: 255 km/h (159 mph)
Actual vehicle speed -
CCS Mem Vehicle Spd Stored vehicle speed Min.: 0 km/h (0 mph)
Max.: 255 km/h (159 mph)
Actual stored vehicle speed -
Throttle Opening Angle Required throttle opening amount Min.: 0%
Max.: 100%
Required throttle opening angle -
Cruise Control Cruise control system active condition OFF or ON ON: Cruise control activated
OFF: Cruise control deactivated
-
Cruise Main Switch Operation Condition Cruise control main switch status OFF or ON ON: Cruise control main switch pushed
OFF: Cruise control main switch not pushed
-
Main SW M-CPU Cruise control main switch signal (Main CPU) OFF or ON ON: Cruise control main switch on
OFF: Cruise control main switch off
-
CCS Ready M-CPU Cruise control system standby condition (Main-CPU) OFF or ON ON: Cruise control main switch (Main CPU) SET
OFF: Cruise control main switch (Main CPU) UNSET
-
CCS Indicator M-CPU Cruise control indicator light signal (Main-CPU) OFF or ON ON: Cruise control indicator light turns on
OFF: Cruise control indicator light turns off
-
Cancel Switch CANCEL switch signal OFF or ON ON: CANCEL switch on
OFF: CANCEL switch off
-
SET/COAST Switch -SET switch signal OFF or ON ON: -SET switch on
OFF: -SET switch off
-
RES/ACC Switch +RES switch signal OFF or ON ON: +RES switch on
OFF: +RES switch off
-
Stop Light Switch 1 Stop light switch signal OFF or ON ON: Brake pedal depressed
OFF: Brake pedal released
-
Stop Light Switch 2 Stop light switch signal OFF or ON ON: Brake pedal depressed
OFF: Brake pedal released
-
Cruise Operation Status Shift lever position signal OFF or ON ON: Cruise control operated
OFF: Cruise control operation stopped
-
Brake Cancel Switch Brake cancel signal OFF or ON ON: Brake pedal depressed
OFF: Brake pedal released
-