Home › Engine / Hybrid System › 1VD-FTV (ENGINE MECHANICAL) › CYLINDER HEAD › from 2016.08
RM25T0E _51 Engine / Hybrid System _029207 1VD-FTV ENGINE MECHANICAL _0132957 CYLINDER HEAD A

1VD-FTV ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE VALVE

HINT:

Arrange the valves, inner compression springs, valve spring retainers and valve spring retainer locks in the correct order.


a.
A164542N01
0.75,2 0.917,2 0.917,2 1.25,1.75 true 2.833,0.25 3.167,0.25 3.167,0.25 3.167,0.417 true 0.469,1.917 0.813,2.104 0.344,0.188 10 false SST 3.031,0.427 3.375,0.604 0.344,0.177 10 false SST

Place the cylinder head sub-assembly on a wooden block.


b.

Using SST, compress the inner compression spring and remove the valve spring retainer lock.

SST
09202-70020  (09202-00010)


c.

Remove the valve spring retainer, inner compression spring and valve.


Hide 13711A 2.REMOVE VALVE STEM OIL SEAL

a.
A164543

Using pliers, remove the valve stem oil seal.


Hide 13734 3.REMOVE VALVE SPRING SEAT

a.
A164544

Using compressed air and a magnet hand, remove the valve spring seats by blowing air.


Hide 11117E 4.REMOVE NO. 1 STRAIGHT SCREW PLUG WITH HEAD (w/ DPF)

a.
A267277C01
0.083,0.104 0.438,0.333 0.354,0.229 10 false *A 0.083,2.323 0.385,2.552 0.302,0.229 10 false *B
*A for Bank 1
*B for Bank 2


Remove the No. 1 straight screw plug with head and gasket.


Hide 23699A 5.REMOVE NOZZLE HOLDER CLAMP SEAT (w/o DPF)

a.
A164545

Remove the 4 nozzle holder clamp seats.


Hide 11117E 6.REMOVE NO. 1 STRAIGHT SCREW PLUG WITH HEAD

a.
A164575C01
0.156,0.26 0.469,0.417 0.313,0.156 10 false *A 0.167,2.531 0.479,2.688 0.313,0.156 10 false *B
*A for Bank 1
*B for Bank 2


Using a 6 mm hexagon wrench, remove the No. 1 straight screw plug with head and gasket.


Hide 7.REMOVE CYLINDER HEAD STUD BOLT

HINT:

If a cylinder head stud bolt is deformed or the threads are damaged, replace it.