Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2016.08
RM25T0E _58 Vehicle Interior _029927 METER / GAUGE / DISPLAY _0137559 METER / GAUGE SYSTEM W

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE METER / GAUGE SYSTEM


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Warning or Display.


v.

Select the setting by referring to the table below.

NOTICE:

Be sure to record the current value before customizing.


Warning
Tester Display Description Default Setting ECU
Driver Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
Front Passenger Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer* ON 0:OFF,1:ON Combination meter assembly
Flasher Sound Tone Setting Function to change the flasher sound tone Tone 1 00:Tone 1,01:Tone 2,10:Tone 3 Combination meter assembly
50006 7

*: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.


Display
Tester Display Description Default Setting ECU
ODO Display Time After IG OFF Setting Function to change the ODO display time after the ignition switch is turned off OFF 00:30s,01:60s,10:600s,11:OFF Combination meter assembly
50006 14