Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135868 FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type) A

1GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type)  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)

NOTICE:

If an fuel sender gauge assembly is removed from the fuel sub tank, replace the fuel sender gauge assembly with a new one.


a.
A388249C01
2.083,1.604 2.375,1.896 2.375,1.896 2.552,1.896 true 2.594,1.802 2.833,1.99 0.24,0.188 10 true *1
*1 Wire Harness Clamp


Install a new fuel sender gauge assembly with the 5 screws to the fuel sub tank.

NOTICE:

Make sure that the wire harness clamp is securely installed with the screw as shown in the illustration.