Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Separate Seat Type with Inner Belt Attached) › from 2016.08
RM25T0E _58 Vehicle Interior _029930 SEAT _0289746 FRONT SEAT ASSEMBLY(for Separate Seat Type with Inner Belt Attached) A

SEAT  FRONT SEAT ASSEMBLY(for Separate Seat Type with Inner Belt Attached)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves. Sharp areas on the parts may injure your hands.



HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the RH side.



PROCEDURE

Hide 71910A 1.REMOVE FRONT SEAT HEADREST ASSEMBLY

a.

Remove the front seat headrest assembly.


Hide 2.REMOVE FRONT SEAT ASSEMBLY RH

a.

Operate the seat track adjusting handle to move the seat to the foremost position.


b.
B456586

Remove the 2 bolts.


c.

Operate the seat track adjusting handle to move the seat to the rearmost position.


d.
B456587

Remove the 2 bolts.


e.

Operate the seat track adjusting handle to move the seat to the center position.


f.

Operate the reclining adjuster release handle to set the seatback of the front seat assembly RH to the perpendicular position.


g.
B452666

Disconnect the connector and detach the wire harness clamp.


h.

Remove the front seat assembly RH from the vehicle.

NOTICE:

Be careful not to damage the vehicle body.