Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the RH side.
72525A 1.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH
| *a | Protective Tape |
Pull up the reclining adjuster release handle RH.
Using a screwdriver, detach the claw and remove the reclining adjuster release handle RH.
Tape the screwdriver tip before use.
71811D 2.REMOVE FRONT SEAT CUSHION SHIELD RH
Detach the band.
| *a | Clip |
| *b | Claw |
Remove the screw.
Using needle-nose pliers, detach the clip.
Detach the claw.
Using moulding remover A, detach the 2 claws and 4 guides.
Using moulding remover A, detach the claw and 2 guides to remove the front seat cushion shield RH.
71861 3.REMOVE FRONT SEAT INNER CUSHION SHIELD RH
Using moulding remover A, detach the 2 claws and 4 guides.
Using moulding remover A, detach the 2 claws and 2 guides to remove the front seat inner cushion shield RH.
73230 4.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH
73240 5.REMOVE FRONT SEAT INNER BELT ASSEMBLY LH
6.REMOVE FRONT SEATBACK ASSEMBLY RH
Detach the 2 hooks.
| *A | LH Side |
| *B | RH Side |
| *a | Protective Tape |
Remove the 4 bolts.
Using a screwdriver, detach the 4 guides to remove the front seatback assembly RH.
Tape the screwdriver tip before use.
71875A 7.REMOVE RECLINING ADJUSTER INSIDE COVER RH
Detach the guide.
Remove the reclining adjuster inside cover RH as shown in the illustration.
71876 8.REMOVE RECLINING ADJUSTER INSIDE COVER LH
Use the same procedure described for the RH side.
71931 9.REMOVE FRONT SEAT HEADREST SUPPORT
Remove the 5 hog rings.
Remove the 3 hog rings and disconnect the strap of the separate type front seatback cover.
Detach the 4 claws and remove the 2 front seat headrest supports.
71073S 10.REMOVE SEPARATE TYPE FRONT SEATBACK COVER
Remove the 8 hog rings and separate type front seatback cover from the separate type front seatback pad.
71551S 11.REMOVE SEPARATE TYPE FRONT SEATBACK PAD
Remove the separate type front seatback pad from the front seatback spring assembly RH.
79977 12.REMOVE SEATBACK FELT
Remove the seatback felt from the front seatback spring assembly RH.
13.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Detach the 12 hooks.
for Front Passenger Side:
| *a | Protective Tape |
Using a screwdriver, detach the claw to disconnect the connector of the occupant detection sensor.
Tape the screwdriver tip before use.
Remove the separate type front seat cushion cover with pad.
71071S 14.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
Remove the 2 hog rings.
Remove the 18 hog rings and the separate type front seat cushion cover.
71537C 15.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH
| *a | Hook |
| *b | Guide |
Remove the screw.
Move the protector in the direction of the arrow to detach the hook and guide to remove the front seat cushion edge protector RH.
71538B 16.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH
Use the same procedure described for the RH side.
72211 17.REMOVE SEAT TRACK ADJUSTING HANDLE
Using a screwdriver, detach the 2 springs and remove the seat track adjusting handle.
| *a | Protective Tape | - | - |
Tape the screwdriver tip before use.